ADAMS DRIVESHAFT JK FRONT & REAR 1350 CV DRIVESHAFT PACKAGE with SOLID U-JOINTS
New Front and Rear Severe Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft with Solid U-joints made by Adams Driveshaft.
Application: 2007 to 2016 Jeep JK Wrangler's 2 or 4 Door Models up to a 6" Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example: [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information after you have ordered.
We do know most of the measurements of your JK, but there are some we do not due to the many different size of lifts, and differentials. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement.
These Severe Duty Solid 1350 CV Driveshaft will work up to 44" Tall Tires. After that you would need to go with our [Insane Duty 1410 Solid U-joint Series] that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
This Item will include the following parts:
 1350 Solid U-joint 2 1/2" X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
 1350 Solid U-joint 2" X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
 1350 Front Transfer Case Output Shaft Yoke.
 1350 Front Dana 44 Pinion Yoke.
 1350 Rear Transfer Case Output Shaft Flange Yoke.
 1350 Rear Dana 44 Pinion Yoke.
 Set of 1350 U-bolts.
 Set of Grade 10 CV Bolts. There is Eight bolts with small heads so they are easier to install.
DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.